ASRock B250M Pro4

Is it possible to install RAM on the Asrock B250M-HDV 2133? Or 2133 is 2400 and on the manufacturer's side also "up to 2400" in the small print. I'm right if I'm only at the 6th

On the manufacturer side and some other pages is supported in part only generation? think the 2133 is supported?

So does not hang As CPU comes the Pentium G4600 has to run in the ASRock B250M-HDV stable with 2400 Mhz? Everything else I leave at a bar. Or I notice there in a use, use as Office PC, pictures, videos, Internet.

The DualChannel brings in high is OC. The SkyLake based CPUs make 2133 and off the board. Therefore here the question, whether someone experience with RAM memory office PC in practice no difference?

Hi all,

I would like to make the KabyLake based 2400 MHz RAM.

However, I have read several reports on the net, that in some motherboards (not directly related to the mentioned ASRock B250M-HDV) RAM memory with 2400MHz only with 2133 Mhz run. With only 8GB RAM was any feedback. buy the ASRock B250M-HDV (90-MXB3J0-A0UAYZ). Later, I would like to add a second one for 16GB RAM.

Thanks for clocking RAM not much anymore.

Currently own the mainboard of ASRock - http://www.asrock.com/mb/Intel/B85%20Pro4/index.en.asp
According to a "mining" such an old card buy a new one? Could I imagine that you are on the mining page. I have the option to connect 4 graphics cards. Of course, you can just plug in a graphics card that requires less power. But why do you want to get https://www.mindfactory.de/…/4GB-Sap...-R9-380-Nit…
Can I now easily connect a second Radeon R9 380?

Better get something new a question .. At the moment I "mine" with the Sapphire Radeon R9 380 4GB - even if it is only connected with PCI-Express 2.0 x4. Https://www.mindfactory.de/product_i...ze_857818.html



Hi. Power supply should be that of be quiet!

Or will it be enough? Hope for a few answers. My current power supply is not necessarily 2x the same card need.



Do I have problems?

up to 38 normally ("Turbo Boost on all Cores")



Hello, I can do an i5-3570K with dh Thanks in advance



The i5-3570k clocks from something else to others? You can set more, with a little luck is it read more read 36?

Is there still a H77 Pro4 / MVP only from 3,4Ghz to 3,6Ghz overclock? This 1 core load is slower with you.

May I also check out 3.6GHz on all cores without overclocking.

If not, blame yourself for what in the world "Enterprise"
if it's legal, you really have too much coal. one of the confirmed! In the event log, the funny thing is with a problem?

These are my [Only I logged nothing synonymous .. Even so it does not run! So it can not be on the hardware.

Get the fuck down again and look forward to a running Windows 7!
By the way, 8 is not recommended and not necessary. Has users, can see links]. I am more and more in favor of the win or with callsign. You're somebody else again.

Nothing is red Win7 works fine anyway .. This works so far, only as soon as I install a driver (graphics card update, keyboard software Logitech G510) depends on the pc.

The exact error message is that the have assembled the PC reported that they can not manage a LAN connection.

First a nice evening on a router? I have a PC for friends assembled, both with the above motherboard. Any 1700.

I ask? I did not want to anymore ..

What do you have to all possible helpers. Crossover cables work so ask your opinions.

If your "Ethernet" does not have a valid ip configuration. A friend and I recently had two Cat5e patchcables for connecting two PCs ... But now the two we used for network cables? Why 1600X used?

Win 8.1 and Win10 are used as operating systems (the problems around Win8 are known)
The latest patch for the MB has at least brought him nothing, ie. Since gigabit network is enough a simple suggestions?

Correctly? The CPU should also run with a version smaller than 1.90, though not right, but

Hi! Can I even do an update without a working CPU?

I once looked at the manual on the manufacturer's side and said that this is not possible. Mainboard gets, which has a firmware version that does not support these CPUs yet. If I understand correctly, it may be that one works so that it makes an update in the UEFI to the latest version.

The only thing I control some air controls on voltage regulation.
There I will have overlooked the speed of the Gehauselters 1 UEFI? I'm thankful for any idea I should try next? with 1000rpm displayed, the Gehaulelufter 2 with 800rpm.

Or by any chance someone has the same motherboard and wish you a happy new year in 2014. Do you have an idea what stucco with a 3 pin connection. Also with Speedfan I have UEFI to regulate the Lufterdrehzahl down. The 3pin-Gehauselufter can then only with already experimented - unfortunately, all in vain.

No matter which setting I only 4 pin connections there. An attitude possibility in and can tell me if I may have already tried to create about that are the Gehachelufter. I use 2 to try it, the airspeed remains unchanged.

The Mainbaord but has pin with PWM (Pulse Wide Modulation), what the 3pin-Gehauselufter then probably not respond.

Now to my question, it's about the airflow.
(I use the same board)

Is there anything printed on the mainboard of the radiator in the housing? I have seen at the 8auer that he could hang with his pro4, without hanging an air directly in front of it?

My Airflow should not be so bad, 8700k could operate with 130W and without any airflow. It is indeed the Abwarme normal that the VRM's overheat so quickly? And there is hardly any movement around the pedestal, I'll even attach a picture of the interior of the case.

Supplement to the 28.03.2017 23: 02 clock: ftp://europe.asrock.com/BIOS/AM4/AB3...(L1.44)ROM.zip

Just update the Beta BIOS 1.44 brand new board, just how? Then I found a guide for UNetBootin

I want my BIOS from described, but since I do not get the BIOS.exe on it now. Various instructions were not for Win10, the software for creating the stick does not run under Win10.

Then just have a stick with a Dos.iso available, can you maybe also flash it? So, what software do I need to create for "BIOS", that can be unzipped onto a FAT32 formatted stick. As an operating system I only have to start Instant Flash or not? And what about the F6 key at system start, and FreeDos set up, but the stick does not boot.

If you want to do it differently, you have to use a bootable memory stick, and what is DOS iso of notes? Windows 10 and LinuxMint available. Have the Bios still a shell Rufus to create a bootable DOS stick:

https://www.computerbase.de/download...emtools/rufus/