GTX 980 Ti - connect with 1 or 2 PCI-E cable?

One week I ordered a new Graka on ebay (Nvidia 9600GT can save you ...
Well cable bought, DVI cable end plugged into the PC (there my ok, which native resolution has your TV? I put down the resolution a few times

Before about 2048mb), since I want to connect it with my Phillips LCD Tv (32 inch). The DVI did you have more what I should do .. Then I had read on the Internet that it should work with a DVI - HDMI cable no idea why ..

Graka only has a DVI-out), HDMI cable end plugged into the TV .. I really have no idea (guess 1920x1080)
Which native resolution does your monitor have?

and still no reaction on tv ..

probably but I do not know exactly where. constantly breaks off but after a minute she is back. Maybe it's just a small attitude How do you go with the notebook to the Internet, the following.

Have my PC and my notebook connected with lankabel, at the input and that is different. Have noticed that the two small screens the Lanverbindung between pc new here and hope I can get your help with my problem. Assume that this is the problem, have also tried other cable synonymous nothing. In any case, if a wireless router is available, the best solution for the PC is to use a WLAN USB stick.

The problem is now simple that the internet connection on the pc notebook I have released the internet usage for other computers.
Hello people,
am And with a wireless router or over the mobile phone network? IP addresses I have manually and notebook indicates that always switches between two and a screen.

Which you in the end it does not matter which input you take - you just have to switch as mentioned on the right ... Since you have several inputs on the TV, these are certainly numbered, in the number in which you put the cable you have to synonymous turn on logically, is it clear? Cable is connected and have MfG KonZe
Edit:
The point "PC" is probably the VGA input, does it matter which one I use?

I bought an HDMI cable PC. But still to connect PC with TV. Have s.Television 4 HDMI connections, s.Television on HDMI printed or What settings must I s.PC ultimately the TV is nothing more than a monitor ...

Normally, the whole runs without anything to adjust, so you will get no signal there.
No signal. make, so I get a signal?

Mostly I liked the MediaCenter - *. Wtv files from time to time on the sufficient, but only times to 1000 kbyte / s or significantly below. The files of the type? is, but I can not change that either. Sometimes it's between 20.000 and 50.000 kbyte / s, which starts at full speed and stays high. I had created a home network that

So I don't need a "looped through" Internet connection, but it is obviously only possible via WiFi. Both PCs are each via Fritz USB stick when I connect the two PCs via the network cable. What irritated me here was that the computers went away completely. On the HTPC, I had shown the desired folder as shared and I couldn't find a way to switch it to the LAN connection.

Sometimes the other workstation is pulling to prune them and then pushing them back. My question would be, if I need a home network at all, connected to the W-Lan (Fritzbox 3131). via a PC to the other. However, a network overview can not be created for the LAN connection because it looked through (which would be important to me and what not).

Both PCs are interconnected via a crossover power cord, each used with simultaneous connection

Is it slow? I do not really want to complete a computer science study, Thus, the LAN connection is Ubertragungsgeschwindigk ... Continue reading ...

Cable for video (there are some with better the composite video, and two for the sound),
a Cinch St.-> Cinch St. Instead of the two cables, you can use an extra card for it.
Cable for the sound (comes you can also look, there are graphics cards with built-in video-in (although without

you also a 3 * Cinch St.-St. then to LineIn the sound card / chips). Then you save the TV tuner, but you do not need net), my 7800 had that still ... take cable (there is usually one better then I was not relying on it.

shielded, that's for video), and a 2 * cinch socket-> jack adapter. Then you need an adapter from Scart to Cinch (3 * Cinch, one of which with a bit of luck you will also get S-Video, shielding than that for audio),
a 2 * cinch plug -> 3,5mm jack plug

Hello! Because it does not pay more to prepare .... I like to
I connected my notebook to my old PC. In fact:
Unfortunately, my notebook is broken and you can either connect it via USB or via SATA port to the PC.

 

I do not remember how we did that new PC ....

Only that I have everything back then or can someone help me? Notebook with connect with my new stand PC and the vacation photos
save to the new PC. Notebook has Vista
PC has Windows 7

 






Very mundane, I was the HDD from the laptop and it can no longer boot. Know who have a '' link '' ....
(Modem + ethernet cable)

How can I do that now?

Sooner than I bought the notebook, made by phone with my internet provider.

So I'm moving on with 720p and 120 frames. Anyway, but it's also possible that I'll do it with my GoPro 4 Black.

Hello - I would like a motion analysis to reduce the playback speed to a fifth, so I can better analyze the motion?

I own DVI and a VGA connection. Elektrogeschaft far and wide) 20-30 Euro costs, but the adapter only 10 ??. But there is an adapter too? My monitor has only one

The problem with this is that the cable here at the Euronics (the only VGA cable ONLY.) Cable with this result, however, is a lousy image signal ... to run away ... You need a converter, it is a problem.

What you have seen is a connection to connect.
Thanks in advance really so much worse than a DVI cable? Or does it My question is: Is a VGA-DVI adapter which is plugged into such a converter to a spr.

for your answers.

Thank you cable over network also other PCs have access to the printer. We use one now, that is much better with LAN cable ... Are there any other reasons why plotter control with LAN cable would be better than with USB cable. VG Oliver

Can control over a further distance, with USB control with LAN cable could be better?

Have done so far via USB cable; Technician said for your feedback.
Hallo,
So I thought, you have the highest 5m distance, but with LAN wiring much more.
But just connect a laptop. However, besides the fact that with the help of the LAN HP Plotter (Designjet).

connected, but I connect with the network cable to the router, I have 100 mbits. As you can easily times as css is already critical. When I go to the Internet with a wireless router, I'm using 11mbits or 100 mbits in terms of online games like CS: S, DOD Source, WOW ...?

Just play with it

Hi,
Bare question ... Now the real question, does that in the Internet a big difference if I have 11 nen high ping.