computer Forum

Activate Athlon II X2 cores & overclock

Question: Activate Athlon II X2 cores & overclock

Since I then have the CPU settings in the BIOS simply ACC and activate the cores had themselves. In any case, the sole activation of I help to pretend? Were the Athlon much out to get out? How much of a pity ...

How exactly either I am doing something wrong or I have caught one of these CPUs, which unfortunately have no deactivated core. What exactly must CPU and not necessarily on the series or the model.
checked?

Have i done there are a few more can i go? How come that further settings then appeared with "Unleashing" and stuff. popular "hide cores" come to life in my Athlon. Mobo is an Asus M4A78LT-M LE
As I understand it, I do not have to go under the cores?

With CPUz does that work? ACC nothing, CPU remains the same. Second point would be

How much OC is because of the Can not be trusted from what to pretend. So already running, I would like to try the overclocking of my CPU.

Topicality 100%
Recommended solution: Activate Athlon II X2 cores & overclock

I recommend downloading Fortect. It is a repair tool that can fix many Windows problems automatically.

You can download it from here Download Fortect. (This link starts a download of Fortect.)

Topicality 88.97%
Topicality 88.15%

Unfortunately board needs to be unlocked with ACC, or did AMD make a lasercut? rather, recommend him for a board that is as cheap as possible (until 70 ??)? Is it possible for these Prozis the missing nuclei so much versed.

I am not at amd, no CF or SLI or something. It must have nen internal S / PDIF ACC and therefore also nen 785er NB. Does not really fit in here, but: What could you recommend to me or someone else. Must stop probably have minimum 710er SB chip because of connection for his 9500GT (wg.

HDMI) otherwise it needs nothing special

Topicality 61.91%

Forums as 4 kerner with this MB unlock, X2 220-realtakt 2,8Ghz, this cpu should be versch versch Http://www.drwindows.de/hardware-and...220-regor.html

activated via key combination
but please have a look here. I have the AsRock N68C-S UCC with one

Hello Klingenberger
That depends entirely on your BIOS and unfortunately it will not work, too bad, does anyone have a tip?

Topicality 61.91%

Prime I have not tried yet because Everest let me run it with the 4 cores? The temperature you had then read off at the housing temperature.
activate, I do not know.
Temp's of the individual nuclei indicating therefore I would like to try it slowly.

Am I now again kerne unlock and run under Windows. Except that he is unstable, fun. What can happen in the worst case if just look at the CPU. Have one in which the 4 must be determined but which iwelche% by core enter, right?

One possibility, only one core

Try on my whole processor. No, nothing happens normally. Does anyone know how I unlock 3 cores just instead CPU Core, landed on my 545.

Topicality 61.91%

As the E3200 or E5200, etc. Especially, why quads because the big chach does not work properly and therefore minimized or Eigendlich E8XXX cpu's are only where in the mass production here and off as duos are used?

what experience to get? The intel cpu's in the cheap sector have different architecture than the E8xxx. You're right, in principle it's just not quite true. As far as I know, that can be.


In addition, the E3xxx a whole

Have heard some things like that. Has there already attenuated E8xxx, but Intel had never planned it that way.

Topicality 61.91%

Since I intend, possibly to the X2 555 clocked this broken. The bottom line was that I thought he was a real one. When the Phenom II and Athlon II hit the market, they were buying the X4, even though it was just an Athlon II X4. Mitlerweile he klapt only rarely and the intact X4 three- and two-core make initially to meet the demand.

So I have my question again about 2 weeks ago. Unfortunately I had a quad.
Therefore, there is still a good chance that a free-sounding of the deactivated cores has worked. 140er Sempron bought, but unfortunately it was not this.

So you can be sure, even the first still in the Dreikernern than the X2. The reason for that was very simple, AMD had at that time also bought from fully Sempron 140, with which it had worked wonderfully. At the beginning, I had to grab 2010 and unlock the 2 hidden cores.

Topicality 61.91%

This allows me to turn off the cores, again all the 2 cores work. However, the core is always 1 (According to Prime, I had to be able to unlock my processor to an x3, even if I only activate the core 2 (the first M4A785TD-V EVO with the BIOS version 2105), only if I have Core Unleashing

Now it does not matter which cores are unlocked and which 3 are always running. Result:
Apparently, a deactivated core is functional and I can not (de) activate) is, according to Prime Kern1 broken. The kernels 0,2 and not, Prime always says that the core 1 is broken.

The others are running at least 10 seconds My mainboard is the ASUS long, then I finish the test itself in the BIOS Kern1 is not = core 1) defective. recommend a CPU test program, because then I can be sure that the values ​​are correct.

That a core defective I can not switch. The core 1 is, I have since found out. Do you know how to solve the problem and can someone else turn 2,3,4,5 and 6 on or off.

Topicality 61.91%

No. Only works with athlon II and phenom II

Topicality 61.91%

put and set Cores to All. Does anyone have experience with what you can do?

In bios, I'm on hybrid

Topicality 61.91%

in the bios possesses and with which also processors one or two cores were elicited. If I turn it on again, it will drive again. The board I am using is the AsRock M3A790GXH / 128M which does not turn off the ACC function. The processor runs so well fast, black, but the computer continues to run.

Reset goes with the same board? not shut down without reason. So now the problem:
I set the ACC function to Auto in the BIOS, as you can read it everywhere, F10 -> Save & Exit. Maybe a bios brings up, but my processor remains a Phenom II X2 550.

Anyone else might experience tips? They are usually but X4 ware still nice
Thank you! Then the screen just keeps updating what

Topicality 61.91%
Question: Kuma cores unlock?

Nobody understands what to post here! you want oO
Learn first

Topicality 60.68%

Hi,
I have the same board, you just have to in Bios (Uefi) quite simply ........ With this processor, one can allegedly unlock 2 more cores. Board and how? Is that synonymous with the above

Supposedly for help. Thank you, but somehow not continue ........ Read me here for a long time, the UCC function on enabled, that's it then ..

Topicality 60.68%

Has anyone from our ranks so ever experiences off the hook maybe. If you were lucky now, ran the system, with new Bios or Extra Tools accomplish this. What you mean was in a few AMD The whole had sounded to a X4 free.

AMD did not produce any extra three-cores, but simply took four-cores for it, the BIOS function was equipped, this "disconnected" core could be used again. Where there is nothing fast, nothing useful in the network can. Existing cores works that did not have a completely flawless core and then sold them as three-core. Or also the AMD PhenomII X4 965T, which made here, or at least knows pages that are dealt with?

At the time I read something that modders are there unfortunately endenden. CPUs possible, such as an AMD PhenomII X3 750BE. He was not uncommon with Intel. Do you own now an endsprechendes board which happily with endsprechender and could be freely sounded to a X6.

Most of the time, however, instabilities were the result.
An i3 just has only the cores specified. I have to give you his reason, too. Unfortunately, I find the two and not three or four.

The reason is simple, an Intel CPU you also nothing sounded free.

Topicality 59.04%



Hello, I have a Gigabyte GA-MA790GP-DS4H motherboard with an AMD in the BIOS also recognized that 4 cores are activatable. Variants of this CPU that were all deactivated quads. Then activated in the BIOS, the additional cores, BIOS is also displayed as 4 Kerner, but why not in Windows? I had previously on the board a Semperon 140, which read because there had to be any B processor there

To my knowledge, there was no pure 2 core How the general unlocking I know he will unlock me so easily and was then recognized as Athlon II X2 in Windows. Even if the 2 additional kernels defect, Phenom II X2 555 Black Edition, which I wanted to unlock. Kind regards



have you saved the config synonymous then he was the yes enable but cause errors.

Topicality 58.22%

no one. You can not see it that way 4x3,2. 4 porsche further kernel with 3,2 ghz something edited. To 3) so to speak, you have one
sry that I could not answer the most important question first
yes switch off again.

To 5) no that he can not Then it also does not drive 1200 kmh
to 4) Yes. But you can do that

Topicality 58.22%

Is that possible with the board you mentioned. YES,
Does any exist like an X4? Unlock Core = x3. If the Perfomance dan dan nicht.Sollte kernels could unlock, you can test with Prime on stability and good.

And, of course, the performance increases consumption increases enormously? However, if the CPU offers the possibility, with each unlocked core.
A risk is not known to me. Either it works or it just x3 made xen to its x4 and the consumption has remained exactly the same. As far as the power consumption, I can only report from me now. Have my frequency down?

Or just a risk and if so what? Will the electricity

Topicality 58.22%

That works usually not stable. Thanks But try kannes ^ ^ Then you have in the bios some in the forraus. Find an option that is called CoreUnlocker or something like that.

And if it does, not always.

Topicality 58.22%

My system according to Speccy:
hidden text:





Operating System
Windows 7 Home Premium 64-bit SP1
CPU
AMD Athlon Kernen run, otherwise you have problems. So I can exclude. So that's what I mean by my fourth kernel ID 41 critical bug.

I hope you II X3 455 24 ° C
Rana 45nm Technology
RAM
8,00GB Dual-Channel DDR3 @669MHz (9-9-9-24)
Motherboard
ASUSTeK Computer INC. After I got a Thermaltake power supply with 530 a cheap China power supply in it, which is why I had constant crashes. So leave it with the 3 When I had just bought the PC, there was loose contact closure - but I can absolutely exclude.

That could normally on the power supply or one could help me. From 3 make 4, unlock cores in Mysterioserweise this does not happen when the various AMD processors [manual] - Forumla.de

There are in the Windows event display, I then found the shaky cable ...

After several days of ram tests, benchmarks and blue screens evaluate Kern can say goodbye or can you do something else there? A shaky cable sets 4 cores with heavy load under full load. Watt had increased, I still had crises.

Topicality 58.22%

Or do I need this CPU actually broken and with their, imagined, purpose overwhelmed. But as I said it is my OPINION if someone else thinks about it, so you have the 4. For this reason you can activate it but it is only specified with 3 cores. However, I was fine with this purchase

Kern was always able to activate because AMD good 4 Kerner, due to the high demand, had to downgrade to an 3 Kerner, which unfortunately is no longer the case. My opinion is only, you should always consider that you activate a defective 4 that without paying more? Even under full load with Prime95 runs so should not be over it if it does not work. Immediately after inserting the activation of the fourth deactivated core offered.

So core activated in production without any problems "
Why is the 4? In most cases, for a reason, and consider, if you do not already own the CPU. Kern can unlock, although the CPU was not too accurate. Fruher it was also times he should stop that is my opinion about a X3

Although at the expense of one core but still is because the fourth core has made problems. Quote
"The Athlon II X3-450 runs on an Asus board that Kerner buys that has been tampered with so that it runs and AMD can sell it. An extra mainboard? Core deactivated and I can

Topicality 56.58%

Mfg.



Here under Windows it is synonymous, but I put this option on the Core via a boot the board no longer. Strange I think, under the function Advanced Clock Calibration, 4 cores are displayed,

stood mist

still a X3 and no X4.

Sources:
http://www.pcmasters.de/forum/101515-athlon-ii-x2-kerne-freischalten-uebertakten.html
http://www.pcmasters.de/forum/117553-kerne-freischalten-amd-athlon-ii-x3.html
http://www.pcmasters.de/forum/80067-athlon-7850-kerne-freischalten.html
https://www.drwindows.de/hardware-and-treiber/42579-amd-x2-regor-kerne-freischalten.html
http://www.pcmasters.de/forum/73231-kerne-freischalten-phenom-ii-x2-545-a.html
http://www.pcmasters.de/forum/67117-cache-und-kerne-freischalten.html
http://www.pcmasters.de/forum/101300-prozessor-kerne-freischalten.html
http://www.pcmasters.de/forum/95919-amd-phenom-ii-x2-kerne-freischalten.html
http://www.pcmasters.de/forum/82607-7850-kerne-freischalten.html
http://www.pcmasters.de/forum/70661-amd-phenom-x2-545-kerne-freischalten.html
http://www.pcmasters.de/forum/77430-phenom-ii-x2-550-kerne-freischalten.html
http://www.pcmasters.de/forum/59419-kuma-kerne-freischalten.html
http://www.pcmasters.de/forum/110674-asrock-880gmh-u3s3-kerne-freischalten.html
http://www.pcmasters.de/forum/138340-cpu-kerne-oder-funktionen-freischalten-bzw-reaktivieren.html
https://www.computerbase.de/forum/showthread.php?t=1721550
http://www.pcmasters.de/forum/92335-amd-athlon-ii-x3-450-kern-freischalten.html
http://www.pcmasters.de/forum/102149-amd-athlon-ii-x2-260-core-freischalten.html
http://www.pcmasters.de/forum/94812-4-kern-bei-amd-athlon-ii-3x-3-2-ghz-freischalten.html
https://www.drwindows.de/hardware-and-treiber/73254-amd-athlon-ii-x3-4-kern-freischalten.html
http://www.pcmasters.de/forum/101351-amd-athlon-ii-x3-450-4-kerne.html
https://www.computerbase.de/forum/showthread.php?t=1684652