Fix Atheros AR5B91 WLAN card, "Device cannot be started" after cold start

Question: Atheros AR5B91 WLAN card, "Device cannot be started" after cold start

Have an Aspire 5530G notebook, OS: Vista, the wifi works fine. Try both!) Survives this condition. After successful driver installation

The main question for me now is whether it is already widely discussed, but no solution has been able to help me so far. Also wait with restarts (approx. 5 minutes) and then activate again in progress. I've already tried various drivers, including those on the Acer site, and this is also a hardware or software problem. Sometimes I get it by deactivating the WLAN card, briefly not with "(Code 10) device cannot be started", disconnecting the mains power accelerates this effect.

Hallo,
I have the following problem, which is found automatically by Windows (these even generate system freezes at variable intervals). Windows updates are up-to-date. However, if I switch the notebook off, let it "cool down" and switch it on again, it starts the Wlan 64 Ultimate SP 1, W-Lan card: Atheros AR5B91.

Topicality 100%

Recommended solution: Atheros AR5B91 WLAN card, "Device cannot be started" after cold start

I recommend downloading Fortect. It is a repair tool that can fix many Windows problems automatically.

You can download it from here Download Fortect. (This link starts a download of Fortect.)

Topicality 86.13%

Question: "The device can not be started (Code 10) '' For PCI-E WLAN Card After Update

Can work even once off and reinstalled but nothing happens. The small LED on the adapter lights now synonymous help someone? Have already tried all sorts of solutions from the network but nothing has Asus and he worked fine until the update. Schonmal thank you in steadily and not as before only with network activity.

I have the 802.11ac dual-band Wireless-AC1300 PCI-E adapter from Manager, only the error message "The device cannot start (Code 10)" is displayed.

Since the last update, I can no longer connect to Wi-Fi and in advance

Read more ...

Topicality 78.59%

Question: Network adapter: "device cannot be started (code 10)"

I tried to reinstall the drivers, but that did not change anything.
I got "device cannot start (code 10)". When I look at the device manager windows XP comes up.

Topicality 78.59%

Question: Bluetooth: Suddenly: "Device cannot be started"

Fixed connection issues with Bluetooth audio and did it all?

Bluetooth Has Wireless Bluetooth Ads So far - Windows Help -
MFG Sam

Read more ...

Hello
Did you work on Windows 10? Suddenly: "Device cannot be started"

Drivers are up to date - what is "broken" there?

Topicality 76.85%

Question: "Automatic WLAN configuration" service cannot be started

On all other devices in the network that is the wireless adapter. The netbook and the router suddenly no more Wi-Fi works. Mock

Can not start service "Automatic WLAN configuration"

Sit back on the last restore point!

Error 1114: A DLL initialization routine failed. "

I have already switched off in the device manager.

Can someone give me a tip there are no problems with the wifi access. "The device is working properly".

Hallo,

I have a netbook, on P.

Under "Properties" it says: Give what else I can try? I suspect that under "Network adapters", among other things, "Broadcom 802.11n network adapter" is displayed. When I try to start this service with the right mouse button, I get the error message "The service Automatic WLAN configuration" on "Local computer" could not be started.

Topicality 96.76%

Question: Message "Unfortunately the store update cannot be started at the moment ..." after the last update ...

Do you have other greetings
Benedict

to be on it? Fixed?

Is this something of the same problem, is there still no solution yet? best

Hello! What does it have hints or ideas? next update of the app if necessary

Thanks and Greetings

Thomas

Read more ...

Hallo,

I have just that

Topicality 93.89%

Question: Error message "module cannot be started xrWCbgnd.dll"

Can you do that in advance. Continue reading...

@ MarcoHendriks, maybe this brings something to it.

After a Windows 10 update I get the error message "Problem with doing this here: http://answers.microsoft.com/de-de/...cbgnddll/4c5261a8-eb5f-4a9c-99db-6384e62dc134

Can someone start me from xrWCbgnd.dll - The specified module was not found ".

Thanks to message delete / fix.

Topicality 93.89%

Question: Error message: "This hardware device cannot be started ..."

So, and now you have to tell us what kind of a drive it is: FD drive, CD drive, DVD burner or BlueRay drive, of course, with the appropriate type designation.

Please make in As next please make something more meaningful topic captions left below your future. Flopy drive can not be used ZB.

Username under "My System" as complete as possible. become or something.

Topicality 93.89%

Question: "The program cannot start." with damfc110udlauf missing

Walter Obkircher

Read more ...

help thank you.

after installation of nero 2016 the program could not be started when the error was opened Please, damfc110draw the computer is missing, reinstall the program to fix the problem.

Topicality 93.89%

Question: Win 7 update "Service cannot be started"

Thank you for your suport.

Windows Update service can not be about the same error 3 days)
7.

Hallo,

I have the error message for some time:
"The service cannot be started, errors seem to be nothing from Mars and OFT occur. Sp 1 is already installed
5. Nvidia driver uninstalled, installed, update etc ...
10.

Services restarted, from, virus scanner uninstalled
8. In the staged manager ALL be started (Win 7 64bit - Microsoft Answers)

Win 7 (regis- ters original) home driver process versions restored
9. Firewall off some files were not repaired some
2.

Head hewn against the wall

The thing with the update dependencies is checking com, dcom, etc ......
6. Fix you may have to restart the PC "
The manual as well as automatic updates do NOT work. Update agent, let it be
3. Win 7 rebuilt (after premium 32 bit @ Lenovo G550 laptop.

Already tried:

1.cmd> sfc scannow, due to an error do not install
4.

Topicality 93.48%

Question: The program cannot be started because the "MSVCP100D.dll" file is missing

Just download and install:

Detail the correct version of the used C ++ Redistributable Package. Hello and welcome to us,

probably missing for free download. Under Windows 7 runs flawlessly

The following error message appears:
BILD

How can I report bugs to Microsoft?

Microsoft offers the Microsoft Visual * C ++ * 2010 Redistributable Package (x64) package

Topicality 93.48%

Question: Laptop starts up but "Windows cannot be started"

What did you print)
STOP: c000021a (severe system error)
The system process windows logon Process was terminated unexpectedly. Since you have no drive, you can also make a usb-stick bootable and copy from another pc from the dvd data on the stick. Status 0xc000
The system has been shut down
I already have it

for a windows? That was wonderful, you would be very, very grateful! At xp you could make a repair installation. [Only logged in users, can see links] removed with Trojan Remover.

Most laptops, however, have a recovery partition on it, most of the time you can choose the recovery option at laptop start or bios.
On the blue screen is (if I disable automatic restart after F8 worked and it worked. Could you please help me?
boot from vista / win7 from the windows dvd and try the system recovery or reinstall windows. I tried everything with this in the F8 menu but nothing works.

Topicality 93.48%

Question: Setup.exe cannot be started.

You could live with that, but repair this "export" with: "sfc / scannow" (without the quotation marks)! Also self-extracting files that have been entered correctly after that and repeat the process. Make sure you have the name message: "setup.exe" could not be found. Problem:
It can not install any programs unzipping on its own wishing to start a setup.exe fail.

To clarify: This error occurs only with the name "setup" then the program will be installed correctly. Here, too, you could help yourself if necessary by manually unpacking, renaming and calling up. By omitting a letter, a solution without reinstallation?

MFG

slobofree

that have the start file "setup.exe". If you name it, the start file is called eg "install.exe", there are no problems. Hello octifahrer, welcome to forum

Try it and it's not a viable solution. Although my problem is mentioned, but the solution suggestions

Someone understands a procedure understandably fails with CD's and DVD`s. But this does not always work around file, eg If it is called, the following will show no success or none at all.

Topicality 91.43%

Question: The service "Print Queue" on "Local Computer" could not be started / ...

Error 0x800706b9: Not enough resources are available for this operation

I want a printer 10 will not start

How do I get a bug fix for Windows10 in the upcoming update? Thanks and regards

Read more ...

To start the printer spooler under Windows the "print queue"? If the error is known and there is install from canon MP490 and only get the note: "The print spooler service is not available".

Topicality 89.38%

Question: The device "Standard Volume" cannot be stopped

There you can with "FIND I have problems. Since I can also use Windows right away, but which process should that be?", It cannot be stopped because a program is still accessing it

But why can not do that? The PID times fast in the is EXPLORER.EXE. downloads and additional resources download the Process Explorer. Restart the hard drive (which I will do now).

The only difference is that Process Explorer is now spitting something out. Ok, it will safely remove problems. I have just looked up a USB stick and a SATA hard drive list and looked what it is. Well, the explanation is understandable, HANDLE are looking for the processes that may be

So from Windows Sysinternals: Documentation, I have not got further. After the backup should etc .... The USB stick was without processes the hard disk?

Try it with the program isusedby from MST ...

A small
Carsten

I entered the drive letter as a search parameter and selected it twice. Somehow I don't understand the root process. I am now wondering whether Explorer.EXE itself or one of the dependent ones is connected to my system to make a backup. The pop-up "The device" standard volume "appears, the devices can be removed" safely ".

It will be EX ... Continue reading ...

Topicality 88.97%

Question: The message "Device can now be removed" no longer appears

not all that. I have to the topic (however for V. Is there the Windows 7) found a contribution:
http://answers.microsoft.com/de-de/windows/forum/windows_7-desktop/meldung-das-ger%C3%A4t-kann-jetzt-entfernt-werden/fcee2110-bef9-41a1-8119-e537581eb8d7
With me or a.

My mother does not work named registry entry ... Greetings
total tingen

Read more ...

anyone advice?

Hallo,
on my mother's new Windows 10 PC, when removing a USB stick, there is no message "The hardware can now be removed". White

Topicality 88.56%

Question: Office 2013 Setup "This app cannot run on this device"

Would be really happy
The Office Setup with and without admin start option tried. And yet the one checked in for their presence, check. Can I find out what the mistake was somewhere? I already read all Kompatibilitatsmodis the exact cause of the error?

Here: Office 2013 not installable: Error FAQ | Borns IT and Windows blog title called and meaningless error message.
Hallo,
I'm trying to install Office 2013 pro on Windows 8.1 pro. I have left all requirements in the tempfolder several log files that can give information about the cause. Does anyone have an idea, a minor flaw, about Office installation issues and how to fix them.

Topicality 85.69%

Question: Fritz Wlan Stick "shoots" Wlan so that no other adapter can be used

Consider the following scenario:
It was installed, then the game started again, again no network access. If not bring you the new stick purely nothing, there solution for your problem. So now what is happening now.

No idea if anyone had the problem schonmal, data within a network to send back and forth. Stick staked, Sitecom stick ran and tadaaa, I have ne connection.

But I get neither a connection to the router of the old avm drive still good until 20.000-25.000er DSL can keep up. Software uninstalled + driver remainders. So already the AVM Wlan Stick of AVM including software. still on the Internet (TCPIPv4 reports: No network access).

The draft-n stick brings you only what if you reinstalled AVM stick, in the software switched to Microsoft Wlan, Well almost, the connection could literally 30 seconds to maintain that but ... I have no unfortunately but I personally am in the end my latin ...

Super I think, restarted, wireless is found and also connected ... New software installed by Sitecom, restarted, stick ran,

Topicality 85.28%

Question: WiFi and Ethernet "Limited" - Qualcomm Atheros AR5BWB222

Hallo,
I found my laptop on a solution
Ethernet sources (I have also tried a mobile Wi-Fi hotspot with my mobile phone, also no success) Windows 10 update are now out of date. On the also Ethernet (cable). Have the same problem have you upgraded Windows 10 and unfortunately have the following problem:
When connecting to any Wi-Fi hotspot / router / etc.

Then I tried with a WLAN stick from NETGEAR with the WLAN or My theory was that the drivers are not because of that, my PC (Windows 8.1) has no problems, both Wi-Fi and Ethernet. WLAN or nevertheless times tried but unfortunately still no success.

So I looked for new drivers (Qualcomm Atheros can I always use the AR5BWB222 network) and unfortunately only found Windows 8.1 drivers. I tried to connect, but the status is "Limited" so no internet connection.

Topicality 84.46%

Question: Message "PC has to be restarted" comes after every boot - endless - Taskhostw.exe

Nothing happens with the latter, couldn't help me and referred me to this community. I then have two options: "Now loaded and upgraded again, with the same result. I even had a backup of Windows 7 Pro back some things in the background and then the window mentioned appears again. My research so far has shown that it is with it

Read more ...

is a "host process for Windows tasks" and Taskhostw.exe. Unfortunately, I don't have a small window that prompts me to restart Windows.

After every startup of Windows 10 Pro comes a Windows 7 Pro on Windows 10 Pro did. The problem I have since I disappear the upgrade except that the window.

Has anyone already had this problem or at least a tip on how to turn it off? With "restart now" Windows shuts down, reboots, makes it possible to find out how to turn it off. The hotline, for which I had to wait almost a week to be called back, "restart" or "restart later".

Topicality 84.05%

Question: "The specified service cannot be started. It is deactivated ........

Ask for help, can not do anything anymore and install, delete or run something (even as an administrator)
It does not work.

hello,
since a few weeks I can not search EXE files and adware already? Have already tried a lot to solve the problem, but
as soon as I get the tool

Please do not blindly click on "Delete". If you also have malware, you absolutely need the laptop!

Hello and welcome xXAlucardXx!

Malwarebytes: Free Anti-Malware

Junkware Removal Tool | Information about not synonymous. Https://toolslib.net/downloads/viewdownload/1-adwcleaner/

This can make an offline scan
Download Kaspersky Emergency CD 10

System Restore works and runs at more
I can not get in the services.