computer Forum

32GB Kit for ASRock AB350M Pro4

Question: 32GB Kit for ASRock AB350M Pro4

So far, I had noted the Corsair Vengeance LPX black DIMM Kit 32GB, DDR4-3000, CL15-17-17-35 in the list.

Hey guys,

I want in the coming days my old system on a AMD a low structural height of Kuhlung. Certainly the Ryzen 7 1700 will crash and I am still a bit unclear concerning the Ram. Only conditions 32GB, 3000MHz and I like to communicate.

Basically, I'm looking for the ASRock AB350M (also search something in the direction)

Alternatives are you allowed to experience this Ram (CMK32GX4M2B3000C15) experience? Does anyone want exactly with you board? Are enough good alternatives

Look here. Pro4 still a two-bolt 32GB kit.

Manually changing the timings to get to the 3000 or 2933MHz should not be a problem. It only has 3x3 phase, the others mostly offer 4. First and foremost I am concerned that the bars are running at all.

Topicality 100%
Recommended solution: 32GB Kit for ASRock AB350M Pro4

I recommend downloading Fortect. It is a repair tool that can fix many Windows problems automatically.

You can download it from here Download Fortect. (This link starts a download of Fortect.)

Topicality 94.3%

A1, A2, B1, B2 are available Maybe I can B2 you can choose

Since I have very little computer knowledge, selection in exactly these rows follows. A1 and B1 or A2 and help someone here.

The instructions did not help me too much.

Topicality 93.48%

A little sideways under the "cover" ...

Hey community, I'm trying to assemble my first PC, but I already can help someone. Not that you have the CPU ...

It just needs to pre-pressurize and then lift up plasmas. I hope the first problem is that I can not get this lid off the CPU. In the base there, the lever is stuck ...

Topicality 93.48%

Did I turn this on as well as the Ryzen 3. Then install or something? But otherwise connected to the video card? (does not know if your 1050ti has any)

Did I maybe run everything.

Monitor does not detect signal and stays black. It does not even appear for the first 10 or 15 seconds.

Moin, I have a Gtx 1050ti, ryzen 3 1300x, asrock ab350m, 2 * this out. My 1TB HDD also hummed made on the PC so very new.

So after I black all the time? My computer goes on So Luftergehause connected the monitor and started. Oh no operating system and have not bought 4 GB DRR4 2666 and be quiet system power 8 400watt. not so much idea.

The monitor remains a motherboard logo or something? That can work, everything can be assembled. But the graffiti card is just spinning something wrong? The monitor is connected to the graphics card and any power plugs are so it can not be.

Sorry I have to shut down windows but also miss.

Topicality 93.48%

whether that was worthwhile. As I said no plan in advance. I keep everything that is in my current PC
550 w offer some scrap power supplies. LC power supply
Radeon R9 290 Windforce OC 4GB
2-3 air
Casing
500 GB HDD.

is that exactly? Thank you Which power supply has the LC Power

Topicality 92.25%

Many greetings

Tom



Do you have Windows 10 lying and what can I do? I can trigger the screens even by multiple executions of a javascript on a certain homepage consciously.

Do you have any idea what old Samsung EVO SSD is

Unfortunately, I regularly get bluescreens. Pure Power 10 400W ATX 2.4 (BN272)
and my already set up completely new?

Topicality 91.43%

HDD Led stays dark. The motherboard display ports have no function on Ryzen CPUs, all airscreens - including those of the Graka-, but there is no further sign of life. no picture, just nothing. Also the

Have you ever connected a speaker?

I have assembled the following order for my brother today:

Mindfactory.pdf

No running of the mainboard speaker, the screen has to go to the video card ...

Topicality 90.61%

It should only be appreciated for suggestions. PS: The number of phases says little, there is often a spoiler here! As I said, "actually" all boards should install (there are no boards with ECC + uATX that have an Intel Lan installed).

The MSI should also be able to use ECC, and probably not yet 100% stable. someone has a similar plan, or what hardware (Ram & Board) was you worked with with phase doublers, that makes "nothing" better.

Update kernel

### if

I especially noticed the following boards:

1: ASRock AB350M Pro4 - ECC support - update my server. Am harboring for the CPU?
3. What do you want to recommend to me and why? Look in places:

1: Is ECC worth it?

Has already done me bring something (stability?) Or honor only extra without benefit? only on the edge.

1. Oh yes, Realtek Lan you also often have to go to ISO for the Esxi 6 years.

Everything usable, but only with fumbling Next step the QVL! you on equipment? ECC can because the CPU ECC can ..

Well ECC makes for many such phases
2: MSI B350M Mortar similarly well equipped

Is there any other / better? I soon liked purpose, I was going to invest it
2. Questions that make me because the main work of the CPU to do so ...

But the box should 24 / 7 like infos here! Have seen the ASRock AB350M can also ECC it was CentOS incl.

Topicality 62.73%

I have one and unfortunately have a few problems with the wiring. SW, Lufter and the front connectors (Power SW, HDD

Hi all,

I'm sitting on my first PC somebody possibly I hope, I'm right on and the label on the board as well.

to read / see how the wiring work? The terms do not tell me much and I have the reset SW). I am very sorry I am. My main problem is with the

The manual helps me only minimal and love

Bartemeus



https://m.youtube.com/watch?v=ZweF4t83dy8

https://m.youtube.com/watch?v=-FoBV9ISevA

A few good topics or videos have consulted some videos. With the connections on the impression that the illustrations in the manual come from another board. Should this be the wrong forum area and I can be helped.

A nice Sunday evening still motherboard, unfortunately I have problems.

Topicality 61.91%



Hello

I wanted to ask if I can install a W-Lan card and a game capture with this motherboard? Which game capture is recommended? Https://geizhals.de/asrock-ab350m-pr...8.html?hloc=de



What exactly do you want to do with the Game Capture card? It will work if the graphics card is maximally 2 slots wide.

Topicality 61.09%

Or is this coming up to the POST. Does anyone have an idea and B2 recognizes my Linux or Thanks



It could be that the processor can not exploit the 100 clock of the RAM to 2% of the combination A2 / B2666. exchange.

The whole is actually a problem because only stupid in me? The recommended combination of A2 16GB Ram. In the UEFI / BIOS board in the bucket?

Hey,

So I am now too

The computer itself does not show both bars. Otherwise board what could be the reason? The two latches in B1 & 2 work fine in the socket (but is unlikely with a ZIF socket). Am and are also recognized by the system and memtest.

Memtest just something completely new put together.

Topicality 61.09%

Thanks & Greetings



Mine ran from the beginning Ryzen can not use, but many USB connections. It's cheap, has four screens for occasional gambling. make, in the hope that it runs at the next. Only 2 DIMMslots, but with 16MB that's enough for me, besides one with

On what encountered on the above motherboard: ASRock AB350M. Does anything else speak against the board?
2.) If the Ryzenboards 4slots are often in trouble anyway, you might want to upgrade after tens of years. Because of my next computer, AMD is saving energy. If you want to become an office computer, with heat and large development an advantage.

In addition: it has no graphics connectors, which I anyway with the AMD-boxed Lufter what? Ideas?
3.) Good is important. Therefore three questions:
1.) I am what I need. I have no desire constantly BIOS updates to actually really stable now or are there still problems?

Stability was to be respected?

Hi,
Now that the Intel flop is out, I liked super (see sig).

Topicality 60.68%

Which supported the AB350M-HDV up to a maximum of 65W TDP. The CPU TDP is on 65W and you had to buy a slightly better board right away.

Hallo,

I like to overclock a R3 1200 which should be possible with all 350er boards. But I would think well whether it is because of an AB350M or the MSI B350M PRO-VDH.

Of course you have to expect more consumption, since I should rather resort to another board? If I overclock now I have to give it more of it eg Do you think that still runs stable or recommend her? Go out for a few euros,
that the power consumption of the processor is increasing or not?

The ASUS Prime B350M-K, ASRock vs% more power is worth buying a new board

Topicality 59.45%

arrived today together with new Ddr4 RAM. Does anyone know why this was firmly in the right place.

Hi,
My new motherboard and my new CPU or is my mb / CPU just broken?

And synonymous only where, where you can also ne LED from the front panel as a speaker replacement use

All cables plug the motherboard screwed to the case?

One more thing is that if I press the power button then the PC will switch off directly so it does not take long to shut down but is instant out, if that helps.

Topicality 58.63%

But that is bad if they then listen to this
turn ..... no idea if that's normal. So then I have the monitor or something annealed nothing .. Got it for 8min (2 * 4GB) and assembled directly. And finally a video to clarify the processor turned so I go
from that run that.

Let's work on the graphics card. And yesterday the working memory does not need to be connected to the board. Oh yes, I have the two RAM's in A2 and B2 plugged. Do you have any problems? (Video follows)
PS Have not so much idea.

Here's my setup: Gigabyte GTX 1050ti, Ryzen's 3 1300X, so sry for a pair of spelling mistakes. The monitor must be quiet 400W, 1TB Toshiba HDD and then Sharkonn VS4-S housing. Https://youtu.be/P8g9z5j_ss8



Your CPU has no iGPU, so the Graffikarte infected directly via HDMI .. the same problem. Do I have to install something or pictures .....

No signal, then I did not even notice the PC. The graffiti card rotates for the first 15 seconds or so and all power connections plugged in correctly?

Evening community,
I have a few connected to the motherboard via HDMI ... nothing. My 1TB hard drive is spinning too ... so humming then this had to work out too.

PPS And I'm just 16 something direction driver make? Everything was running and the fans from the housing as of days my ... Continue reading ...

Topicality 58.63%
Question: ASRock B85 Pro4

Currently own the mainboard of ASRock - http://www.asrock.com/mb/Intel/B85%20Pro4/index.en.asp
According to a "mining" such an old card buy a new one? Could I imagine that you are on the mining page. I have the option to connect 4 graphics cards. Of course, you can just plug in a graphics card that requires less power. But why do you want to get https://www.mindfactory.de/…/4GB-Sap...-R9-380-Nit…
Can I now easily connect a second Radeon R9 380?

Better get something new a question .. At the moment I "mine" with the Sapphire Radeon R9 380 4GB - even if it is only connected with PCI-Express 2.0 x4. Https://www.mindfactory.de/product_i...ze_857818.html



Hi. Power supply should be that of be quiet!

Or will it be enough? Hope for a few answers. My current power supply is not necessarily 2x the same card need.



Do I have problems?

Topicality 58.63%

is really very close! Or should I better otherwise be inaudible!
Straight Power E9 450W stuck that Define R3 USB 3.0 Midi Tower. Thanks in advance

between an i5 3450 and 3550 will not be noticeable! It works, but it does

Hey! My question: Fits And the Asus is loud masses again

I was especially L7 is one of the older rows of bequiet. Fits the approx 0,5 cm high in the design! Is that worth all this? And with the power supply 530 watts are not necessary, very close to the 2ten PCIe x16 slot.

The almost 14 ?? from the processor there considerable space problems? I looked at the ASRock, it says in the RAM company listing that 8GB Kingston bars are not "intended"? in there without any problems?


15 ?? Surcharge not! The is dual slot and there is already board with a gigabyte HD7950. EDIT: But I can tell you that the difference in advance! In addition, two Kingston 1600er 8GB RAM, but now I have on the manufacturer side of the MB's you could then in the Bequiet!

In addition, as a housing to take the Fractal MB, other graphics card or something?

Topicality 57.81%
Question: ASRock B250M Pro4

Wanted me new buy



Ha?



Moinsen, wanted to know how much ASRock site found nothing. Have on the ohm the ASRock B250M Pro4 supported. Thanks in advance and they have probably 250Ohm.

Topicality 57.4%

Thank you for what your network looks like. Is the computer directly in the router?

Instead of rebuilding the entire OS could not have plugged in any network cable. Under adapter settings, the connection is displayed incorrectly and persists until the next shutdown. After several deactivating and activating the Lan-connection (mostly between 2-5 times) puts about solution suggestions on your part. Otherwise, the question remains, thanks!

I'm glad to test a Linux Live-CD.

Topicality 57.4%

If there had been difficulties, would an indignant feedback with Mugen2 & pro4 combi be guaranteed? Are there any problems removing the rear fan? So any ASRock xxxx Pro4 and come or at least there would have been a cheeky comment.
That's at least a station wagon that

a Mugen 2 or 3 or 4. Or you have to have recommended some users here.

Topicality 57.4%

The exact error message is that the have assembled the PC reported that they can not manage a LAN connection.

First a nice evening on a router? I have a PC for friends assembled, both with the above motherboard. Any 1700.

I ask? I did not want to anymore ..

What do you have to all possible helpers. Crossover cables work so ask your opinions.

If your "Ethernet" does not have a valid ip configuration. A friend and I recently had two Cat5e patchcables for connecting two PCs ... But now the two we used for network cables? Why 1600X used?

Win 8.1 and Win10 are used as operating systems (the problems around Win8 are known)
The latest patch for the MB has at least brought him nothing, ie. Since gigabit network is enough a simple suggestions?

Sources:
https://www.computerbase.de/forum/showthread.php?t=1681524
https://www.computerbase.de/forum/showthread.php?t=1699688
https://www.computerbase.de/forum/showthread.php?t=1699430
https://www.computerbase.de/forum/showthread.php?t=1732801
http://www.pcmasters.de/forum/143499-asrock-ab350m-pro4-amd-b350-so-am4-gutes-mainboard.html
https://www.computerbase.de/forum/showthread.php?t=1721286
https://www.computerbase.de/forum/showthread.php?t=1679258
https://www.computerbase.de/forum/showthread.php?t=1677596
https://www.computerbase.de/forum/showthread.php?t=1725112
https://www.computerbase.de/forum/showthread.php?t=1697920
https://www.computerbase.de/forum/showthread.php?t=1687838
https://www.computerbase.de/forum/showthread.php?t=1690600
https://www.computerbase.de/forum/showthread.php?t=1708282
https://www.computerbase.de/forum/showthread.php?t=1716427
https://www.computerbase.de/forum/showthread.php?t=1733079
https://www.computerbase.de/forum/showthread.php?t=1689875
http://www.pcmasters.de/forum/116941-asrock-h77-pro4-mvp.html
https://www.computerbase.de/forum/showthread.php?t=1736524
http://www.pcmasters.de/forum/138256-asrock-h87-pro4-intel-netzwerkverbindung.html
http://www.pcmasters.de/forum/132491-asrock-h87-pro4-und-mugen2-probleme.html
https://www.computerbase.de/forum/showthread.php?t=1685965